AS/NZS 1158.1.1:2005
Lighting for roads and public spaces - Part 1.1: Vehicular traffic (Category V) lighting - Performance and design requirements
Specifies performance and design requirements for Category V lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design for and assess compliance with those requirements.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 ROAD CLASSIFICATION
2.2 GENERAL OBJECTIVE
2.3 DESIGN OBJECTIVES
2.3.1 Principal objectives
2.3.2 Other considerations
2.4 LIGHTING SUBCATEGORIES AND THEIR APPLICATION
2.5 LIGHT TECHNICAL PARAMETERS
2.5.1 General
2.5.2 Applicable parameters
2.6 LUMINAIRE REQUIREMENTS
2.6.1 Upward waste light ratio
2.6.2 Ballast losses
2.6.3 Minimum luminaire efficacy rating
2.6.4 Colour rendering
2.7 DESIGN LAMP LUMEN VALUE
2.8 'Text deleted'
2.9 ENERGY AUDIT
2.10 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.10.1 General
2.10.2 Luminaire maintenance factor
2.10.3 Lamp lumen maintenance factor
2.10.4 Maintenance factor
2.11 BASIS OF COMPLIANCE
2.11.1 Compliance of the design
2.11.2 Compliance of the installation
SECTION 3 DESIGN METHODS AND RULES
3.1 BASIS OF DESIGN
3.1.1 General
3.1.2 Departure from design spacing
3.1.3 Maintenance regime
3.2 STRAIGHT SECTIONS
3.2.1 Design method
3.2.2 Design rules
3.3 CURVES
3.3.1 General
3.3.2 Choice of design method
3.3.3 Illuminance-based computer calculations
3.3.4 Curve spacing chart method (luminance based)
3.4 INTERSECTIONS AND OTHER SPECIFIED LOCATIONS
3.4.1 General
3.4.2 Luminance-based requirements
3.4.3 Illuminance-based requirements
3.5 ISOLATED INTERSECTIONS
3.5.1 Application
3.5.2 Design rules
3.5.3 Solar-powered lighting
SECTION 4 PROVISION OF LUMINAIRE DATA
4.1 LUMINAIRE DATA
APPENDIX A - REFERENCED DOCUMENTS
APPENDIX B - BIBLIOGRAPHY
APPENDIX C - DESIGN BRIEF
C1 SITE PLANS
C2 LIGHTING SCHEME PERFORMANCE REQUIREMENTS
C3 SPECIFIC REQUIREMENTS
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE OF THE DESIGN WITH THIS STANDARD
D1 MANDATORY REQUIREMENTS
D2 OPTIONAL REQUIREMENTS
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Traffic control devices manual - Part 9 - Level crossings
Ministry: NZ Transport Agency
Section: 7.9
Citation context:However, road lighting may sometimes help bring to the attention of drivers the presence of a level crossing that may otherwise have been missed. In particular, section 3.5.2(b)(ii) of the road lighting Australian and New Zealand Standard AS/NZS 1158.1.1:2005 Main street lighting: Lighting for road and public spaces, part 1.1 Vehicular traffic (category V) lighting: Performance and design requirements refers to a method of lighting known as flag lighting, where...
Similar Standards
-
AS/NZS 1158.0:2005
Lighting for roads and public spaces - Part 0: Introduction -
AS/NZS 1158.0:2005 A1
Lighting for roads and public spaces - Part 0: Introduction: Amendment 1 -
AS/NZS 1158.0:2005 A2
Lighting for roads and public spaces - Part 0: Introduction: Amendment 2 -
AS/NZS 1158.1.1:2022
Lighting for roads and public spaces - Vehicular traffic (Category V) lighting - Performance and design requirements
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 ROAD CLASSIFICATION
2.2 GENERAL OBJECTIVE
2.3 DESIGN OBJECTIVES
2.3.1 Principal objectives
2.3.2 Other considerations
2.4 LIGHTING SUBCATEGORIES AND THEIR APPLICATION
2.5 LIGHT TECHNICAL PARAMETERS
2.5.1 General
2.5.2 Applicable parameters
2.6 LUMINAIRE REQUIREMENTS
2.6.1 Upward waste light ratio
2.6.2 Ballast losses
2.6.3 Minimum luminaire efficacy rating
2.6.4 Colour rendering
2.7 DESIGN LAMP LUMEN VALUE
2.8 'Text deleted'
2.9 ENERGY AUDIT
2.10 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.10.1 General
2.10.2 Luminaire maintenance factor
2.10.3 Lamp lumen maintenance factor
2.10.4 Maintenance factor
2.11 BASIS OF COMPLIANCE
2.11.1 Compliance of the design
2.11.2 Compliance of the installation
SECTION 3 DESIGN METHODS AND RULES
3.1 BASIS OF DESIGN
3.1.1 General
3.1.2 Departure from design spacing
3.1.3 Maintenance regime
3.2 STRAIGHT SECTIONS
3.2.1 Design method
3.2.2 Design rules
3.3 CURVES
3.3.1 General
3.3.2 Choice of design method
3.3.3 Illuminance-based computer calculations
3.3.4 Curve spacing chart method (luminance based)
3.4 INTERSECTIONS AND OTHER SPECIFIED LOCATIONS
3.4.1 General
3.4.2 Luminance-based requirements
3.4.3 Illuminance-based requirements
3.5 ISOLATED INTERSECTIONS
3.5.1 Application
3.5.2 Design rules
3.5.3 Solar-powered lighting
SECTION 4 PROVISION OF LUMINAIRE DATA
4.1 LUMINAIRE DATA
APPENDIX A - REFERENCED DOCUMENTS
APPENDIX B - BIBLIOGRAPHY
APPENDIX C - DESIGN BRIEF
C1 SITE PLANS
C2 LIGHTING SCHEME PERFORMANCE REQUIREMENTS
C3 SPECIFIC REQUIREMENTS
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE OF THE DESIGN WITH THIS STANDARD
D1 MANDATORY REQUIREMENTS
D2 OPTIONAL REQUIREMENTS
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
AS/NZS 1158.1.1:2005
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.